Omron DEVICENET#05-2003 Operation Manual page 83

Transistor Output Units
Terminal Arrangement
Connector Pin Arrangement
Wiring
72
The following diagram shows the pin arrangement for the connector.
Attach MOLEX connectors to the Transistor Output Unit and connect them to
external devices.
Applicable Connectors
Manufac-
turer
MOLEX Pressure-
welded
Crimp
Wiring Examples
Note V terminals and V connector pins, as well as G terminals and G connector
pins, are internally connected. When the I/O power is being supplied from a
terminal block, the power can be supplied to the output devices from the V
and G connectors. Current supplied in this way, however, must be less than
2 A.
Output
Output
Connector
Housing 521-09-0390
Housing 50-57-9403
Reeled contacts 16-02-0069
16-02-0086
Loose contacts 16-02-0096
16-02-0102
Crimping tool 570-36-5000
11-01-0209
24 VDC
+
I/O power
supply
Section 4-4
G V
Model number Remarks
For AWG#24
---
For AWG#24 to 30
For AWG#22 to 24
For AWG#24 to 30
For AWG#22 to 24
For AWG#22 to 26
For AWG#24 to 30
Solenoids,
valves, etc.