Omron DEVICENET#05-2003 Operation Manual page 56

Transistor Input Units
Terminal Arrangement
Wiring
Dimensions
65
4
Row A
Row B
Row C
24 VDC
I/O power
supply
Note V terminals and G terminals are internally connected. When the I/O power is
being supplied, the power can be supplied to the input devices from the V ter-
minals and G terminals. Current supplied in this way, however, must be less
than 1 A.
140
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Terminal numbers
NPN output 2-wire sensor
3-wire sensor (limit switch)
(photoelectric or
proximity sensor)
Wire colors in parentheses are the previous JIS colors
for photoelectric and proximity sensors.
Section 4-3
NPN output 3-wire
sensor
(photoelectric or
proximity sensor)
Approx. 89
80
60
(Unit: mm)
35
45