Omron DEVICENET#05-2003 Operation Manual page 123

Analog Input Units
Conversion Time
Dimensions
If the conversion data is a negative number, it is expressed as a two's comple-
ment. To obtain an absolute value from this two's complement, the NEG
instruction is useful.
The conversion data is refreshed every 8 ms for all 8 points. With 4 inputs, the
data is converted every 4 ms for all 4 points.
110
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Approx. 70
60
Section 5-1
(Unit: mm)
113