Omron DEVICENET#05-2003 Operation Manual page 144

Analog Output Units
Wiring
Output Ranges and
Converted Data
134
Attach MOLEX connectors to the analog output connectors, and connect the
outputs as shown in the following diagram.
Applicable Connectors
Manufac- Connector
turer
MOLEX Pressure-
welded
Crimp
The Analog Output Unit converts the digital output data to analog values. The
analog values depend on the output signal ranges, as shown in the following
diagrams.
1 to 5 V
The hexadecimal values 0000 to 1770 (0 to 6000) correspond to an analog
voltage range of 1 to 5 V. The entire output range is 0.8 to 5.2 V.
Voltage
5.2 V
5 V
1 V
0.8 V
0 V
FED4
0000 (0)
8000
( 300)
Model number
Housing 521-09-0390
Housing 50-57-9403
Reeled contacts 16-02-0069
16-02-0086
Loose contacts 16-02-0096
16-02-0102
Crimping tool 570-36-5000
11-01-0209
+
Power
supply
24 VDC
External
device
1770
(6000)
Section 5-2
Remarks
For AWG#24
For AWG#24 to 30
For AWG#22 to 24
For AWG#24 to 30
For AWG#22 to 24
For AWG#22 to 26
For AWG#24 to 30
Converted data
Hexadecimal
189C
7FFF
(Decimal)
(6300)