Gt1-Id16Ml Transistor Input Unit With Connector (Npn) - Omron DEVICENET#05-2003 Operation Manual

Transistor Input Units
Dimensions
4-3-5

GT1-ID16ML Transistor Input Unit with Connector (NPN)

Input Specifications
52
Wiring Examples
Note V terminals and V connector pins, as well as G terminals and G connector
pins, are internally connected. When the I/O power is being supplied from a
terminal block, the power can be supplied to the input devices from the V and
G connectors. Current supplied in this way, however, must be less than 1 A.
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Number of input points
Number of points that can be ON simultaneously
Note The number of input points that can be ON simultaneously depends
on the ambient temperature, as shown below.
Max. No. of input points
+
I/O power
supply
NPN output
3-wire sensor
(photoelectric or
proximity sensor)
Wire colors in parentheses are the previous JIS colors
for photoelectric and proximity sensors.
Item
Section 4-3
2-wire sensor
(limit switch)
Approx. 70
(Unit: mm)
Specifications
16 points
16 points max.
Ambient temperature ( C)