Accessing The Test Menu - Paradyne HOTWIREt 7984 User Manual

Testing

Accessing the Test Menu

Î
Î
7984-A2-GB20-10
From the Test menu, you can run network tests, data port tests, and a front panel
lamp test.
To access the Test menu, follow this menu selection sequence:
Main Menu Test
main/test
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Select . . .
Network and DSX-1 Tests
Device Tests
Abort All Tests
February 1999
TEST
Network & DSX-1 Tests
Device Tests
Abort Tests
To . . .
Start and stop tests on the DSX or network interface.
Start and stop lamp test.
To abort all current tests excluding network-initiated
loopback tests. An aborted test may continue to run for
a few seconds as the abort command is sent to the
remote end and processed.
5
Hotwire
Model: 7974
Î Î
Î Î
MainMenu Exit
5-1