Accessing The Test Menu - Paradyne Hotwire 7975 User Manual

Testing

Accessing the Test Menu

Î
Î
7975-A2-GB20-40
From the Test menu, you can run network tests, data port tests, and a lamp test
for the front panel LEDs.
To access the Test menu, follow this menu selection sequence:
Main Menu Test
main/test
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Select . . .
Network Tests
SYNC Data Port Tests
Device Tests
Abort All Tests
December 1998
TEST
Network Tests
SYNC Data Port Tests
Device Tests
Abort All Tests
To . . .
Start and stop tests on the network interface.
Start and stop tests on the SYNC Port interface.
Start and stop lamp test.
To abort all current tests. Network-initiated tests will not
be affected. An aborted test may continue to run for a
few seconds as the abort command is sent to the
remote end and processed.
5
Hotwire
Model: 7975
Î Î
Î Î
MainMenu Exit
5-1