Exit Osd; Service Level 2 Functions - Eizo SCD 19102 Instructions For Use Manual

Start-up

6.5 Exit OSD

6.5 Exit OSD
Exit OSD menu

6.6 Service level 2 functions

NOTICE
"Service level 2" is restricted to service personnel trained by EIZO GmbH Display Tech-
nologies.
The "Service level 2" menu can be accessed from the OSD main menu.
Key combination for opening "Service level 2"
• Briefly press the Up key and immediately keep the Down key pressed.
Menu structure
38
Accept changes
Reject changes
You exit the OSD and can
save or reject any changes.
Press key 2 if you unintention-
ally entered this menu and want
to return to the main menu.
Note: If the OSD menu is exited
by changing the timing or
switching off the monitor, the
changes made are saved.
SCD 19102
Instructions for Use, 06/2022