Eizo SCD 19102 Instructions For Use Manual page 61

Note
Once all settings in Force Mode have been performed, the zoom factor can be set in the
"Position / Zoom" menu.
Saving of several timings
Save the timings in the OSD menu "Servicelevel 2 → User / Custom settings".
Up to five timings can be saved.
1. Select the storage number via "Custom settings number".
2. Save the timing by selecting "Save custom settings" and execute with key 2.
3. The saved timing is now identified by a "1" in "Save custom settings".
The location in the "Save custom settings" number where the 1 is set depends on the
selected "Custom settings number". For example, if you have selected "1" as the "Cus-
tom settings number", the 1st position of "Save custom settings" us set to "1".
Saved timings can be overwritten at any time.
Motion image improvement
If the setting "For motion pictures" is selected and "Force" is carried out in the menu "Blind
mode" or "Live mode", the menu line "Motion image improvement" is displayed with the set-
ting "Inactive".
If the motion image improvement is to be activated, the setting for this must be changed
from "Inactive" to "Active" either in the "Servicelevel 2" → "Others" menu or in the "Blind
mode" or "Live mode" of the Force Mode menu.
SCD 19102
Instructions for Use, 06/2022
Start-up
6.8 System settings
61