Product-Specific Safety Instructions - Eizo SCD 19102 Instructions For Use Manual

2.2 Product-specific safety instructions

CAUTION
If the SCD 19102 is installed on a stand:
Adjust the monitor height carefully, otherwise there is a risk of injury
When adjusting the height of the monitor, make sure that you do not trap your fingers or
any other objects.
CAUTION
Ensure monitor stability
The stability of the monitor must be ensured following installation of the stand/holder. The
screw insertion depth into the monitor must be between 7 and 9 mm.
CAUTION
Subsequent installation of a stand
The SCD 19102 C and SCD 19102 CP monitors are delivered without a stand. To ensure
that a system comprising a monitor and base meet the requirements of standard
EN 60601, select a stand for subsequent installation that meets this standard.
SCD 19102
Instructions for Use, 06/2022
Safety information
2.2 Product-specific safety instructions
11