Eizo SCD 19102 Instructions For Use Manual page 44

Start-up
6.6 Service level 2 functions
Service level 2
Force Mode
Temperature
44
Function Adjustment /
setting range
Execute
Blind mode
Live mode Execute
Help Execute
Temperature 25 °C - 90 °C
limit
Default: 60 °C
25 °C - 90 °C
Shutdown tem-
perature
Default: 70 °C
Information
Operation time
above 160 cd
Description
Force Mode is a tool for setting
unknown timing that is not dis-
played via Exact Modes that
have already been stored.
Suitable for direct entry of Force
Mode data that have already been
determined.
Note: See Monitor adjustment -
Force Mode [} 51]
Force Mode is a tool for setting
unknown timing that is not dis-
played via Exact Modes that
have already been stored.
Suitable for step-by-step setting of
an unknown timing or for fine ad-
justment of a timing whose data
have been entered using "Blind
mode".
Note: See Monitor adjustment -
Force Mode [} 51]
Short description of the Force
Mode functions
Temperature beginning at which
the monitor is dimmed
Temperature beginning at which
the monitor is switched off
Operating hours meter
Instructions for Use, 06/2022
SCD 19102