Eizo SCD 19102 Instructions For Use Manual page 19

1.3mp 19" lcd monitor

Hide thumbs Also See for SCD 19102:

Table of Contents

NOTICE

Cable

• The picture quality, interference immunity, and emitted interference of the entire system

depend on the cable quality and length.

• When using a BNC to VGA adapter cable, the signal cables, for example, red, green,

and blue, must be of the same length to prevent a loss in image quality.

• Use only the cables specified by EIZO or the transmission links available from EIZO.

Note

• The video signals coming from a graphics card are referred to in the following as RGB

signals, and those coming from a camera, DVD player, video recorder etc. as video sig-

nals.

In the OSD menu, some of the menu displays are also identified by RGB or video ac-

cordingly in the header.

• At least one signal source must be connected in order to activate the OSD.

• All signal inputs may be connected simultaneously.

• The Up and Down keys can be used to select which RGB or video source is to be dis-

played when the OSD is not active. Selection is also possible in the OSD.

Fig.:

Overview of signals and connections

SCD 19102

Instructions for Use, 06/2022

Connecting

5.4 Connecting the signal cable

Table of Contents