Eizo SCD 19102 Instructions For Use Manual page 79

Recommended minimum distance between portable or mobile RF communications devices
and the SCD 19102
The SCD 19102 is intended for use in an electromagnetic environment in which interference due to
electromagnetic radiation is controlled. The customer or user of the monitor can help prevent electro-
magnetic interference by maintaining the recommended minimum distance between portable and
mobile RF communications devices (transmitters) and the monitor.
The interference immunity regarding adjacent fields has been confirmed for the following wireless RF
communications devices:
Test fre- Band-
a)
quency width
(MHz) (MHz)
385 380 - 390 TETRA 400
450 430 - 470 GMRS 460
710 704 - 787 LTE band
745
780
810 800 - 960 GSM 800/90
870
930
1720 1700 -
1990
1845
1970
2450 2400 -
2570
5240 5100 -
5800
5500
5785
a)
For some radio services, only the frequencies for the radio contact from the mobile communica-
tions device to the base station (uplink) is included in the table.
b)
The carrier is modulated by a square wave with 50 % duty cycle.
SCD 19102
Instructions for Use, 06/2022
13.2 Information on electromagnetic compatibility (EMC)
a)
Service Modulation
Pulse modu-
b)
lation 18 Hz
FM ±5 kHz
deviation
FRS 460
1 kHz sine
Pulse modu-
b)
13, 17 lation
217 Hz
Pulse modu-
b)
0 lation 18 Hz
TETRA 800
iDEN 820
CDMA 850
LTE band 5
GSM 1800; Pulse modu-
b)
CDMA 1900 lation
GSM 1900 217 Hz
DECT
LTE band 1,
3, 4, 25
UMTS
Bluetooth Pulse modu-
b)
WLAN lation
802.11 b/g/n 217 Hz
RFID 2450
LTE band 7
WLAN Pulse modu-
b)
802.11 a/n lation
217 Hz
b)
Maximum Minimum
power distance
(W) (m)
1.8 0.3
2 0.3
0.2 0.3
2 0.3
2 0.3
2 0.3
0.2 0.3
Appendix
Measure- Compli-
ment level ance level
(V/m) (V/m)
27 27
28 28
9 9
28 28
28 28
28 28
9 9
79