Main menu
SCD 19102
Instructions for Use, 06/2022
Function
Adjustment /
setting range
DPMS setting
DPMS
Enabled
Disabled
Default: Enabled
DPMS Off mode
Dimmed
(backlight)
Disabled
Default: Dimmed
LUT selection
LUT backlight
Enabled / Dis-
command
abled
Default: Enabled
Select gamma
1 ... 5
curve
Default: LUT 1
6.4 Menu functions
Description
The DPMS (Display Power Man-
agement System) can be
switched on/off
When the DPMS is activated and
there is no input signal, the back-
light is switched off or darkened
(depending on the parameter for
the "DPMS Off mode": see below).
This saves power, and increases
the service life of the backlight.
"DPMS Off mode" can be set to
"Dimmed" or "Off". The backlight is
then either dimmed or switched off
when the DPMS mode is active.
Permits access to the backlight
•
When "On" is set, the backlight
cannot be changed in the
"Brightness/contrast" menu.
•
When "Off" is set, the backlight
can be changed in the "Bright-
ness/contrast" menu.
Gamma curve selection:
information on the selected
curve
The LUTs that can be selected are
displayed in the table in the OSD
menu.
See
Monitor adjustment – LUT
[} 51]
Start-up
35