Eizo SCD 19102 Instructions For Use Manual page 41

Service level 2
Test and Reset
SCD 19102
Instructions for Use, 06/2022
Function Adjustment /
setting range
Disabled
Test pattern
Color bars
Gray bars
Calibration pic-
ture
Default: Disabled
6.6 Service level 2 functions
Description
Fixed test patterns are available
The test patterns are generated
directly in the monitor's processor.
The test patterns can be used to
analyze whether a fault is present
in the control electronics or has to
be searched for in the plugs/ca-
bles or video source.
1. If the test pattern is displayed
without faults, one should first
check the connections and
video sources.
2. If the video source and the
connections are OK, and if
the test pattern is displayed
perfectly, the fault must be
searched for in the video input
range of the monitor.
The test patterns can also be
used to check the panel quality:
• Proof of the contrast with gray
scales and color channels (in-
dependent of picture, picture
program, graphics card and
connectors).
• All the pixels on the display
area are activated (exception:
The first column on the left of
the panel remains black). Test
of columns or line driver
Start-up
41