Eizo SCD 19102 Instructions For Use Manual page 30

Start-up
6.4 Menu functions
Main menu
Auto functions (only
for analog signal)
Language
Others
30
Function Adjustment /
setting range
The auto functions are used to automatically set parameters.
The quality of settings depends on the image content and type of
synchronization.
All settings can of course also be optimized manually using the corre-
sponding items in the OSD menu.
Note: We recommend that an SMPTE test picture is displayed
On / Off
Auto brightness/
contrast
Default: Enabled
Auto position/ On / Off
phase/fre-
Default: Enabled
quency
Execute selected Execute
auto functions
German, English
Default: English
Description
This parameter can be selected
for the auto function
With "On", the brightness and con-
trast are set when the "Auto func-
tions" are executed.
With "Off", the brightness and con-
trast are not set when the "Auto
functions" are executed.
Note: This function is not available
for "Sync on green signals".
This parameter can be selected
for the auto function
With "On", the position, phase, and
frequency are set when the "Auto
functions" are executed.
With "Off", the position, phase, and
frequency are not set when the
"Auto functions" are executed.
The selected auto functions are
executed
This sets brightness, contrast, posi-
tion, frequency and phase to their
optimum values. The quality of the
function depends on the applied
image contents.
Use the "Language" menu to se-
lect the language of the OSD
menu
German or English can be se-
lected. English is the delivery de-
fault setting.
Instructions for Use, 06/2022
SCD 19102