Eizo SCD 19102 Instructions For Use Manual page 45

Service level 2
Special functions for
VGA and BNC signals
SCD 19102
Instructions for Use, 06/2022
Function Adjustment /
setting range
Activated / deacti-
PLL phase gain
adjustment vated
Default: Deacti-
vated
6.6 Service level 2 functions
Description
Note: Menu item "PLL phase
gain" is displayed when "PLL
phase gain adjustment" is acti-
vated.
The value for the PLL phase gain
is set through the XICOR AD con-
verter.
Note: If "PLL phase gain adjust-
ment" is changed from activated
to deactivated, menu item "PLL
phase gain" is hidden and the
phase gain is set to the default
value.
PLL phase gain
Controls the level of phase error
returned to the digital PLL Each
key figure has double the weight
of the previous key figure.
• 0000: (minimum gain)
• 0111: [default]
• 1111: (maximum gain)
If the "PLL phase gain" is set too
low or too high, distorted images
will be displayed.
Setting the best PLL phase gain
The best PLL phase gain can be
obtained with the "Check-11" pixel
on / pixel off image from the
Quantum Data 802R video test
generator.
Start-up
45