Connection Panel; Connecting The Signal Cable - Eizo SCD 19102 Instructions For Use Manual

Connecting

5.3 Connection panel

5.3 Connection panel
A connection panel for the signals and power supply is located on the back of the monitor
Fig.: Connection panel of the SCD 19102
15-pin Sub-D socket
Analog input with 15-pin sub-D connector (female) for a VGA cable with 15-pin sub-D con-
nector (male).
DVI socket
DVI input for a DVI cable with DVI-I or DVI-D connector.
4-pin mini-DIN socket (S-Video)
S-Video input (Y/C signal) for a video cable with 4-pin Mini-DIN connector.
BNC socket (composite)
Analog input for a video cable with composite connector

5.4 Connecting the signal cable

CAUTION
Opening the connector panel cover
Only service may open the connector panel cover. Patients must not be present when the
cover is open.
CAUTION
Connector
Connectors may only be plugged in or removed by Service when the device is switched
off.
18
SCD 19102
Instructions for Use, 06/2022