Operation; Locking Or Unlocking The Osd Menu - Eizo CuratOR LX550W Instructions For Use Manual

Operation

7.1 Locking or unlocking the OSD menu

7 Operation
Once installed, operating the monitor consists mainly of switching the power on and off.
After switching on the monitor, the operation LED is lit green continuously. If the LED lights
up with another color, the monitor is not operating within normal operation.
Note
Switching off the monitor
When the monitor is switched off, the counter for the warm-up time is reset. To ensure sta-
ble brightness, a warm-up time of 20 to 30 minutes is recommended, even if the monitor is
switched off for a short period of time.
Measures in the event of a failure
Note
Device malfunction in operation
If the device is not working properly, check the system for basic connection and operating
errors before contacting service personnel.
7.1 Locking or unlocking the OSD menu
CAUTION
Locking and unlocking the OSD menu
• Only authorized service personnel may lock or unlock the OSD menu.
• The OSD must be locked if inappropriate operation by the user can impact the intended
use of the monitor.
The OSD is locked when delivered.
To lock or unlock the OSD menu, proceed as follows:
1. Press the "Enter" key once.
2. Then press the "Down" key three times.
The OSD menu is now locked or unlocked, depending on its initial state.
28
Enter
Downward
CuratOR LX550W
Instructions for Use, 04/2021