Eizo SCD 19102 Instructions For Use Manual page 13

Modification of gray scale setting
In medical applications (e.g. for radiography, computed tomography, and MRI), where pic-
tures are usually displayed in shades of gray, the gray values can be adapted to the user's
eye. This calibration is performed at the factory and is therefore available when shipped
(factory calibrated monitor). In addition, five different settings (Look Up Table – LUT) are
saved in the monitor. To switch to a different LUT, please speak to service personnel, who
will make the change using the On-Screen Display (OSD) or the QA software.
Screen resolution
The monitor is equipped with an active 19" TFT display that has an extremely wide viewing
angle. The monitor offers maximum grayscale contrast across a very wide viewing angle (in-
plane switching (IPS) technology). The optimum screen resolution is 1280 x 1024 pixels.
Video signals with other resolutions, as are common in medical technology, are enlarged or
reduced to fit the screen size optimally. Alternatively, they can be displayed in their original
size (1:1).
RGB input (15-pin Sub-D/DVI/BNC)
The monitor is connected to the computer system using either the 15-pin Sub-D input socket
or the DVI-I input socket.
If necessary, the monitor display is adjusted using an OSD (On Screen Display) menu.
Video inputs
The SCD 19102 has two additional analog video inputs. As a result, the monitor can operate
with standard analog video signals (PAL/NTSC). The RGB and video inputs can be con-
nected simultaneously to different signal sources.
Force Mode
Using the Force Mode function, the SCD 19102 can be adapted to special timing settings.
Protective screen
The SCD 19102 CP has anti-glare protective screen fitted over the top of the LCD panel to
protect the surface of the panel against bumps and scratches. The front of the monitor is
protected against moisture (IPx2 protection). The space between the protective screen and
the panel is sealed to prevent dust from entering, thus helping ensure the internal surfaces
remain clean.
Landscape and portrait modes
The device can be used in landscape and portrait modes. The image rotation for portrait
mode is made on the graphics card.
In portrait mode, the keyboardd is positioned at the top right and the OSD is not rotated (i.e.
the OSD inscription "Dynamic help for keypad function" is still positioned above the keys).
SCD 19102
Instructions for Use, 06/2022
Description
3.2 Performance features
13