Eizo SCD 19102 Instructions For Use Manual page 22

Connecting
5.6 Installing the base and cable
6. First tighten the top two screws.
7. Then carefully turn the monitor 90° clockwise and tighten the lower screws.
8. Route the connecting cable in the cable duct.
CAUTION: Do not route the connecting table too tightly in the cable duct
When the monitor turns on its axis there is a risk of bending or crushing the connecting
cable. For this reason, the connecting cable must not be routed too tightly in the cable
duct.
22
SCD 19102
Instructions for Use, 06/2022