Lock Or Unlock Osd Menu - Eizo CuratOR LX1910 Instructions For Use Manual

Operation

7.2 Lock or unlock OSD menu

OSD keys
The OSD keys could be locked or unlocked.
The unlocked OSD keys have the following functions:
OSD key Function
1 •
2 •
3 •
4 •
•
•
5 •
•
6 •
•
7 •
7.2 Lock or unlock OSD menu
CAUTION
Locking and unlocking the OSD menu
• Only authorized service personnel may lock or unlock the OSD menu.
• The OSD must be locked if inappropriate operation by the user can impact the intended
use of the monitor.
Note
Unlock the OSD menu (prerequisites)
The OSD cannot be unlocked unless one of the following prerequisites is met:
• A signal is present at the selected signal input.
See also "Monitor settings" menu
• Searching for sources becomes active once the monitor is switched on. Searching for
sources terminates after about 10 seconds if power saving mode has been set in OSD,
otherwise it will run continuously.
Unlock OSD menu
• Press key 7 and then key 5 three times.
(Key 1 is the first key from the left)
Lock the OSD menu
• In the OSD menu "Monitor Settings" under "OSD settings", set the "OSD keylock" func-
tion to "On".
The OSD menu then becomes locked once power to the monitor is cycled.
24
Changing the LUT
Switching the input signals
Without function
Open OSD menu
Execute menu functions
Open or leave menus
Navigate down in the OSD menu
Decrease/change values
Navigate up in the OSD menu
Increase/change values
Exit OSD menu
[} 31].
CuratOR LX1910
Instructions for Use, 08/2022