Eizo SCD 19102 Instructions For Use Manual page 78

Appendix
13.2 Information on electromagnetic compatibility (EMC)
Recommended minimum distance between portable or mobile RF communications devices
and the SCD 19102
The SCD 19102 is intended for use in an electromagnetic environment in which interference due to
electromagnetic radiation is controlled. For other portable and mobile RF communication devices
(transmitters), the recommended minimum distance between the portable and mobile RF communi-
cation devices (transmitters) and the monitor applies as listed below. This is based on the maximum
output power of the communication device.
Maximum nominal Recommended minimum distance according to the frequency of the
output power of transmitter (m)
the transmitter
150 kHz to 80 MHz
(W)
d = 0.6 √P
0.01 0.06
0.1 0.19
1 0.60
10 1.90
100 6.00
For transmitters whose maximum nominal output power is not shown above, the recommended mini-
mum distance "d" in meters (m) can be determined using the formula for calculating the frequency of
the transmitter. "P" here stands for the transmitter's maximum measured nominal output power in
watts (W), as recommended by the transmitter's manufacturer.
Note: For 80 MHz and 800 MHz, the recommended minimum distance for the higher frequency
range applies.
Note: This information may not be applicable in all situations. Absorption and reflection by struc-
tures, objects, and people impact the propagation of electromagnetic waves.
78
80 MHz to 800 MHz
d = 0.35 √P
0.04
0.11
0.35
1.11
3.50
800 MHz to 2.7 GHz
d = 0.7 √P
0.07
0.22
0.70
2.21
7.00
SCD 19102
Instructions for Use, 06/2022