Page 1
Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Guide (separate volume) • The latest User’s Manual is available for download from our site: http://www.eizo.com...
Page 2
EIZO NANAO CORPORATION’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Page 4
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. [LCD Panel] • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. •...
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • 22” wide format LCD Applicable to WSXGA+ (1680×1050) (S2233W)/ 22” wide format LCD Applicable to WUXGA (1920×1200) (S2243W) • Built-in speakers and headphone jack 1-2 “Controls and Functions”...
Option speaker (i·Sound L3) mounting holes * ScreenManager ® is an EIZO’s nickname of the Adjustment menu. See Chapter 1 Features and Overview Detects ambient brightness. Auto EcoView function Allows you to switch the Auto EcoView function On or Off Displays the EcoView index (page 22).
1-4 Functions and Basic Operation To adjust the screen and color Main menu (Refer to page 12 for operation) [At analog signal input] [At digital signal input] • The Adjustment menu and the FineContrast mode name cannot be displayed at the same time. FineContrast mode Color Adjustment Simple Adjustment [FineContrast mode] This function allows easy selection of a desired mode from six modes according to monitor application. ●...
Page 11
Setting Language [Language] ● Locking Buttons ……………………… see ● Enabling/Disabling DDC/CI communication [DDC/CI] ……………………………… see ● Setting EIZO logo display ON/OFF … see ● Adjusting the DVI Input Level [DVI Input Level] ……………………… see Power-save Settings ● Setting On/Off for Power Saving mode [Power Save] ………………………see...
Page 12
Basic operation of Adjustment menu [Displaying Adjustment menu and selecting function] (1) Press . The Main menu appears. (2) Select a function with (3) Select a function with (4) Adjust the selected item with [Exiting Adjustment menu] (1) Choose <Return> from the Sub menu and press (2) Choose <Exit> from the Main menu and press NOTE •...
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme. txt” file on the disk for software startup procedures or file access procedures.
When the screen is displayed correctly, go to step 5 “To adjust color gradation automatically [Range]”. Prepare the display pattern for the analog display adjustment. Load the “EIZO LCD Utility Disk” to your PC, and then open the screen adjustment pattern files. Chapter 2 Settings and Adjustments...
Page 15
Perform the auto adjustment again with the analog screen adjustment pattern displayed. ● To adjust flickering, screen position, and screen size automatically [Screen] (1) Display Pattern 1 of the screen adjustment pattern files in full screen on the monitor. (2) Choose <Screen> from the <Auto Adjustment> menu, and press The <Auto Adjustment> menu appears. (3) Choose <Execute> with Flickering, screen position, and screen size are corrected by the auto- adjustment function.
Page 16
● To correct screen position [Position] (1) Choose <Position> from the <Screen> menu, and press The <Position> menu appears. (2) Adjust the position with properly in the display area of the monitor, and press The adjustment is completed. Adjust the color gradation. ● To adjust color gradation automatically [Range] Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
2-3 Color Adjustment ● To select the display mode (FineContrast mode) FineContrast allows you to select the best display mode easily according to the monitor’s application. FineContrast mode Mode Custom Available to change all setting values. Allows the brightness to be set lower than possible with EyeCare other modes.
● To perform advanced adjustments Independent setting and saving of color adjustment are available for each FineContrast mode. ● Adjustment items in each mode According to the FineContrast mode selected, the adjustable function differs. √ : Adjustment available −: Invalid for adjustment Icon Function Custom EyeCare Brightness √...
● To adjust the color temperature [Temperature] The color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). In the same way as the flame temperature, the image on the monitor is displayed reddish if the color temperature is low and is bluish if the color temperature is high.
● To adjust the hue [Hue] This function allows you to adjust the hue. If you set the hue to a high value, the image turns greenish. If low, the image turns purplish. Adjustable range: -32 to 32 (1) Choose <Color> from the Adjustment menu, and press (2) Choose <Hue>...
2-6 Turning off the audio output at Power Saving mode [Power Save] This monitor allows you to turn off the audio output from the speakers/ headphone at the power saving mode. (1) Choose <Sound> from the Adjustment menu, and press (2) Choose <Power Save> from the <Sound> menu, and press The <Power Save>...
[Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting. Monitor Operating Operating Power saving Power saving 2-9 Turning off the monitor automatically [Off Timer] This function allows you to switch the setting to turn off the monitor automatically after a specified time has passed at the power saving mode.
2-11 Screen Size Selection ● To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen Size> from <Others> menu. Menu Displays an image in full screen. Images are distorted in Full Screen some cases because the vertical rate is not equal to the (default setting)
2-12 Setting Adjustment Menu Display ● To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent] Menu Size Change the Adjustment menu size using the following procedure. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Menu Settings> from the <Others> menu, and press (3) Choose <Menu Size> from the <Menu Settings> menu, and press The <Menu Size>...
2-13 Setting Orientation ● To set the orientation of the Adjustment menu [Orientation] This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Orientation> from the Others menu, and press The <Orientation>...
(2) Press holding down to turn on the monitor. The EIZO logo display setting is toggled by performing the operation in step 2. Chapter 2 Settings and Adjustments , and press , and press NOTE •...
2-20 Resuming the Default Setting [Reset] There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. ● To reset color adjustment values Only the adjustment values in the current FineContrast mode will revert to the default settings (factory settings).
Chapter 3 Connecting Cables 3-1 Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the D-Sub mini 15 pin, the DVI-D and the DisplayPort connector on the back of the monitor. Connection examples DisplayPort D-Sub mini DVI-D connector connector 15-pin Connector Analog Digital...
● To set input signal selection [Input Signal] The monitor recognizes the connector through which PC signals are input. When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Priority setting Auto When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal.
(1) A PC equipped with a USB port or another USB hub connected to a USB compatible PC (2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later (3) EIZO USB cable (MD-C93) ● Connection Procedure (Setup of USB Function) (1) Connect the monitor first to a PC using the signal cable, and run the PC.
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2. • Imaging problems (digital input) → See No.3 - No.8. • Imaging problems (analog input) → See No.3 - No.12. •...
Page 32
Problems 4. Characters are blurred. 5. Afterimages appear. 6. Green/red/blue/white dots or defective dots remain on the screen. 7. Interference patterns or pressure marks remain on the screen. 8. Noise appears on the screen. 9. Display position is incorrect. 10. Vertical bars appear on the screen or a part of the image is flickering. 11. Whole screen is flickering or blurring. 12. Upper part of the screen is distorted as shown below. 13. The <Smoothing> icon on the Adjustment menu <Screen> cannot be selected. 14. The adjustment menu does not appear. 15. The auto adjust function does not work correctly. Chapter 4 Troubleshooting Possible cause and remedy • Check whether the signal setting of your PC matches the resolution and the vertical frequency settings for the monitor.
Page 33
Problems 16. No audio output. 17. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. Possible cause and remedy • Check whether the mini jack cable is correctly connected. • Check whether volume is set to 0. • Check the setting of the PC and the audio playback software. • During DisplayPort signal input, check the [Source] setting.
Chapter 5 Reference 5-1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. Remove the stand. (Prepare a screwdriver.) Unscrew the four screws securing the unit and the stand with the screwdriver.
5-2 Folding the EZ-UP stand Perform the following procedures to fold the stand when re-packing a monitor with an EZ-UP stand. Remove the cable holder. Lower the monitor screen position until the hinge of the stand touches the stand base, and attach the lock metal fitting. Adjust the monitor angle so as the monitor screen not to touch the stand base. Hinge Stand Base Fall the monitor screen backward with keeping slide-up the “Unlock” knob.
5-3 Specifications S2233W LCD Panel Dot Pitch Horizontal Scan Frequency Vertical Scan Frequency Resolution Max. Dot Clock Max. Display Color Display Area (H × V) Power Supply Power Screen Display On Consumption Power saving mode Power button Off Main Power switch Off Input Signal Connector Analog Input Signal (Sync) Analog Input Signal (Video)
Page 37
Mass Main unit (including Height adjustable stand) Main unit (including EZ- UP stand) Main unit (includeing FlexStand) Main unit (without stand) Approx. 6.6 kg (14.6 lbs.) Movable range Height adjustable stand EZ-UP stand FlexStand Environmental Temperature Conditions Humidity Pressure Standard Port Supply current S2243W...
Page 38
Power Screen Display On Consumption Power saving mode Power button Off Main Power switch Off Input Signal Connector Analog Input Signal (Sync) Analog Input Signal (Video) Digital Signal (DVI-D) Transmission System Video Signal Memory Audio Output Line input Plug & Play Dimensions Main unit (including (Width) ×...
Page 39
Environmental Temperature Conditions Humidity Pressure Standard Port Supply current Main default settings (factory settings) Auto EcoView Smoothing FineContrast Mode PowerManager Input Signal Screen Size Off Timer Menu Settings Menu Size Menu Off Timer Language Operating temperature: 5 °C - 35 °C (41 °F - 95 °F) Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F) Operating humidity: 20% - 80% R.H.
Page 42
Connector Pin Assignment • DVI-D connector Pin No. Signal T.M.D.S. Data 2- T.M.D.S. Data 2+ T.M.D.S. Data2/4 Shield DDC Clock (SCL) DDC Data (SDA) • D-Sub mini 15-pin connector Pin No. Signal Red video Green video Blue video Ground • DisplayPort connector Pin No. Signal ML Lane3- Ground ML Lane3+...
Page 43
* May not allowed to attach the option speaker depending on the stand type. For the latest information about the accessories, refer to our web site. http://www.eizo.com Remarks Cable power Serial data Serial data Cable ground EIZO ScreenCleaner i•Sound L3* PP200 Chapter 5 Reference...
5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment.
Page 45
Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1680 (S2233W) / 1920 (S2243W) horizontal pixels and 1050 (S2233W) / 1200 (S2243W) vertical pixels. At a resolution of 1680×1050 (S2233W) / 1920×1200 (S2243W), all pixels are illuminated as a full screen (1:1). sRGB (Standard RGB) International standard for “color reproduction and color space”...
5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). Mode Dot clock VGA 640×480@60Hz 25.2 MHz VGA TEXT 28.3 MHz 720×400@70Hz VESA 640×480@73Hz 31.5 MHz VESA 640×480@75Hz 31.5 MHz VESA 800×600@56Hz 36.0 MHz VESA 800×600@60Hz 40.0 MHz VESA 800×600@72Hz 50.0 MHz VESA 800×600@75Hz...
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (enclosed) This Class B digital apparatus complies with Canadian ICES-003.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß...