Start-up
6.8 System settings
Motion image improvement with interlaced signals
Note
With the setting "Motion image improvement" for interlaced signals, the sharpness settings
cannot be changed in the "Others" menu.
Using the motion image improvement, it is possible to reduce undesirable comb effects in
the case of motion images of interlaced signals with PAL and NTSC resolutions connected
to the VGA" and "DVI Analog" signal inputs.
Motion image improvement with non-interlaced (progressive) signals
Using motion image improvement, it is possible to reduce undesirable staircase signals in
the case of all non-interlaced signals of up to 60 Hz connected to the "VGA" and "DVI Ana-
log" signal inputs.
Note
Despite motion image improvement, staircase signals can occur with PIP images of the
signal sources "S-Video" and "Composite Video". The staircase signals can occur if a sig-
nal source with motion image improvement is active in the main picture.
62
SCD 19102
Instructions for Use, 06/2022