Connection Panel - Eizo CuratOR EX190 Instructions For Use Manual

Connecting
5.2 Device connectors

5.2.2 Connection panel

CAUTION
Opening the connection panel cover
• Only service may open the connection panel cover.
• The screw torque may not exceed 0.75 Nm +/- 0.05 Nm.
• Patients must not be present when the cover is open.
Fig.: EX190 connection panel
DisplayPort
The monitor has a DisplayPort connector.
5 V connector
The monitor has a 5 V output that can be used to supply external devices.
DVI interface
The monitor has a DVI-I connector.
BNC In
Input for BNC connector "G" for displaying gray scale images.
BNC Out
Output for BNC connector "G".
USB ports
The USB-A ports enable communication with external devices.
The USB-B port enables communication between the monitor and a connected PC, or can
be used for service purposes.
Power connector
The device's power supply is connected using an appliance plug.
Power switch
The power switch is to the right next to the connection panel cover and is used to turn the
device on and off.
20
DisplayPort 5V/1A DVI-I BNC BNC USB USB
In Out Type A Type B
Power Power
connector switch
CuratOR EX190
Instructions for Use, 06/2022