Table of Contents
Advertisement
5.3 Connection panel
The connection panel is visible after removing the cover. The LX490W has connectors for
power, communication, and video input and output signals.
Power
USB A
connector
Fig.:
LX490W connection panel
Signal inputs
The following signal inputs are available on the connection panel.
•
VGA input (15-pin D-sub socket): In addition to a standard VGA signal, other analog sig-
nals can be connected with a suitable adapter. Examples include component, composite,
and RGB video using a multi-BNC to VGA adapter.
•
DVI-I input
•
HDMI input: In addition to a standard HDMI cable, a DVI cable (digital operation) can be
used with a DVI to HDMI adapter or cable.
•
HD-SDI (BNC)
•
S video with Y/C signal (4-pin mini-DIN socket)
•
Composite (BNC)
Note
Interlaced signals
If an interlaced signal is applied to a signal input (except for the HD-SDI input) and the
"Deinterlacing" function in the "Signal" OSD menu is set to "Normal", brightness is reduced
by approx. 15%.
The deinterlacing settings "Field to frame" and "Static mesh" cause a slight loss in bright-
ness only, but can lead to comb effects.
Also refer to the "Deinterlacing" function in the
Signal outputs
The following signal outputs are available on the connection panel.
•
VGA output (15-pin D-sub socket):
•
HD-SDI (BNC)
•
S video with Y/C signal (4-pin mini-DIN socket)
•
Composite (BNC)
CuratOR LX490W
Instructions for Use, 06/2017
Composite
Out
In
Out
In
Out
USB B
S-Video
In
VGA
DVI
"Signal" menu
Connecting
5.3 Connection panel
HD-SDI
In
Out
Up
HDMI
5V/1A
RS 232 Bus
Service
[} 37].
Down
21
Advertisement
Table of Contents
