Product-Specific Safety Instructions - Eizo CuratOR LX1910 Instructions For Use Manual

2.2 Product-specific safety instructions

CAUTION
Setting the monitor height
When the monitor is installed on a stand, setting the monitor height can result in injuries.
• Carefully change the monitor height.
• When changing the height of the monitor, make sure that you do not trap your fingers or
any other objects.
CAUTION
Tilting the monitor
Tilting the monitor can result in injuries or damage to the device.
ü The attachment screw insertion depth into the monitor must equal max. 10 mm.
• Ensure that the monitor is stable after installing a stand.
NOTICE
Subsequent installation of a stand
If a stand is subsequently attached to the monitor, the stand must meet the requirements
of standard EN 60601 so that the system, comprising the stand and monitor, meets the re-
quirements.
Note
No zero error rate
LCD monitors do not have a zero error rate. For this reason, the image parameters can
change over time, e.g. reduced luminance or changing/fading colors.
Note
Image quality
To maintain constant image quality, EIZO recommends cleaning the monitor on a regular
basis and checking image properties in accordance with all applicable local regulations.
CuratOR LX1910
Instructions for Use, 08/2022
Safety information
2.2 Product-specific safety instructions
11