Product-Specific Safety Instructions - Eizo CuratOR EX190 Instructions For Use Manual

Safety information

2.2 Product-specific safety instructions

2.2 Product-specific safety instructions
CAUTION
Check the gray levels
After each LUT recalculation performed in the "Adjust LUT" menu, it is absolutely neces-
sary to apply an appropriate test pattern and check that all gray levels are displayed cor-
rectly.
CAUTION
Setting the monitor height / turning the display
When the monitor is installed on a stand, setting the monitor height or turning the display
can result in injuries.
• Carefully change the monitor height.
• When changing the height of the monitor or turning the display, make sure that you do
not trap your fingers or any other objects.
• To turn the display, move the monitor to the highest monitor position.
CAUTION
Tilting the monitor
Tilting the monitor can result in injuries or damage to the device.
• Ensure that the monitor is stable after installing a stand.
NOTICE
Subsequent installation of a stand
If a stand is subsequently attached to the monitor, the stand must meet the requirements
of standard EN 60601 so that the system, comprising the stand and monitor, meets the re-
quirements.
Note
No zero error rate
LCD monitors do not have a zero error rate. For this reason, the image parameters can
change over time, e.g. reduced luminance or changing/fading colors.
Note
Image quality
To maintain constant image quality, EIZO recommends cleaning the monitor on a regular
basis and checking image properties in accordance with all applicable local regulations.
12
CuratOR EX190
Instructions for Use, 06/2022