Period Specification; Scaling Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

Current value sampling function
This function samples data to be output to a report when creation trigger is generated.
After a creation trigger occurs, current value data is acquired in the next sampling period and is output in the report file.
Sampling interval
Creation trigger condition
(Data comparison)
Target data of current
0
value sampling
Output value
When data conditions are specified to the creation trigger, current value and creation trigger can be sampled in the same
interval.
Sampling interval
Creation trigger condition
(Data comparison)
Target data of current
0
value sampling
Output value

Period specification

When the specified conditions are satisfied, the period to create report and the period not to create report can be specified.
Creation trigger can be monitored only during the period to create.
The conditions to specify period can be selected from the following and can be specified by combining multiple conditions.
 Data conditions
 Date range
 Time range
 Day of the week/Week of the month conditions
For details, refer to the following:
Page 47 Period specification

Scaling function

This function uses linear function transformation for sampled device values.
For details, refer to the following:
Page 48 Scaling function
Creation trigger detection
10ms
1 2
Creation trigger detection + Current value sampling
10ms
1 2
2
Current value sampling
ON
OFF
3 4
3
ON
OFF
3 4
1 FUNCTION
75
1.3 Report Function
1