Mitsubishi Electric MELSEC iQ-R Series User Manual page 385

• FILTER
Item Description
NO No.
RANGE Range setting
IPADSTART Target IP address (start)
IPADEND Target IP address (end)
*1
IPADEXCLD IP address excluded from the range
*1 When multiple IP addresses are specified, data is separated with a semicolon and then output.
■Logging operation setting (LOGGINGACT.txt/csv)
Item Description
ATLG Enable the auto logging function
STOPFILEMAX Stop due to the number of saved files
over
(conditions for stopping the operation
of module)
STOPFILEMAXTYPE When all of the saved files exceed a
maximum number/When any of the
saved files exceeds a maximum
number
(conditions for stopping the operation
of module)
STOPTIMER Stop by a timer
(conditions for stopping the operation
of module)
STOPTIMERTIME Elapsed time
(conditions for stopping the operation
of module)
STARTWAIT Specify the waiting time for the module
operation start
STARTWAITTIME Waiting time
■SD memory card setting (SDMEMORY.txt/csv)
Item Description
FRCP Specify free capacity
TYPE Percent specification/Size
specification
PERCENT Percent specification
SIZE Size specification
Condition Setting value

1 to 16
Selected YES
Unselected NO
 *.*.*.* (IP
address)
RANGE is "YES" *.*.*.* (IP
address)
RANGE is "YES" *.*.*.* (IP
address) or blank
Condition Setting value
Selected YES
Unselected NO
Selected YES
Unselected NO
When all of the saved files ALL
exceed a maximum number
When any of the saved files ANY
exceeds a maximum number
Selected YES
Unselected NO
STOPTIMER is "YES" 1 to 86400
Selected YES
Unselected NO
STARTWAIT is "YES" 0 to 255
Condition Setting value
Selected YES
Unselected NO
Percent specification PERCENT
Size specification SIZE
TYPE is "PERCENT" 10 to 50
TYPE is "SIZE" 50 to 4096
Appendix 12 Setting Information File Format
Remarks



This item is not applied in the
following situation.
• RANGE is "NO"
This item is not applied in the
following situation.
• RANGE is "NO"
Remarks

This item is not applied in the
following situation.
• ATLG is "NO"
This item is not applied in the
following situation.
• ATLG is "NO"
• STOPFILEMAX is "NO"
This item is not applied in the
following situation.
• ATLG is "NO"
This item is not applied in the
following situation.
• ATLG is "NO"
• STOPTIMER is "NO"

This item is not applied in the
following situation.
• STARTWAIT is "NO"
Remarks

This item is not applied in the
following situation.
• FRCP is "NO"
This item is not applied in the
following situation.
• FRCP is "NO"
• TYPE is "SIZE"
This item is not applied in the
following situation.
• FRCP is "NO"
• TYPE is "PERCENT"
APPX
383
A