Mitsubishi Electric MELSEC iQ-R Series User Manual page 273

Error code Error name
1B09H FTP server login error
1B0AH FTP server command execute
error
1B0BH FTP server data transfer port
connection error
1B0CH FTP server data transfer port
disconnection error
1B0DH Shared folder connecting error
1B0EH Shared folder disconnecting
error
1B0FH File transfer not allowed
1B10H E-mail setting file error
1B13H E-mail transmission error
1B15H No attached file error
1B16H SMTP server login error
1B17H E-mail header send error
1B18H E-mail main text send error
1B19H Attached file send error
1B1AH SMTP server logout error
1B1BH E-mail sending not possible
Error description
Failed to login to the FTP server.
Failed to execute the FTP command for the FTP
server.
Failed to connect to the FTP server's data transfer
port.
Failed to disconnect from the FTP server's data
transfer port.
Failed to connecting to shared folder.
Failed to disconnecting to shared folder.
Made a file transfer request during "Network
setting" default operation.
Failed to read the "E-mail setting" file.
Or failed to resolve the domain name.
An error occurred during the e-mail transmission.
The saved file to be attached to the e-mail was
deleted before transmission because of file
switching.
Failed to connect to the mail server (SMTP
server).
Failed to send the e-mail header.
Failed to send the e-mail body.
Failed to send the attachment.
Failed to disconnect from the mail server (SMTP
server).
Made an e-mail transmission request during
"Network setting" default operation.
Corrective action
• Correct the file transfer settings.
• Check the connection status with the FTP
server.
• Check the destination FTP server status.
• Check the connection status with the FTP
server.
• Check the destination FTP server status.
• Check if the write access authority is set on the
destination FTP server.
• Correct the file transfer settings.
• Check the connection status with the FTP
server.
• Check the destination FTP server status.
• Check the connection status with the FTP
server.
• Check the destination FTP server status.
• Correct the file transfer settings.
• Check the network connection status with the
PING test.
• Check the connection status with shared folder.
• Check the destination shared folder status.
• When turning the power ON immediately after it
is turned OFF, wait a few minutes before turning
it ON.
• Check the connection status with shared folder.
• Check the destination shared folder status.
• Clear "Network setting" default operation.
• Write the settings again with the Configuration
Tool.
• Correct the "E-mail setting".
• Set the "SMTP server name" with an IP
address.
• Review the E-mail setting.
• Check the connection status with the mail
server.
• Check the destination mail server status.
• Configure the authentication settings in E-mail
setting.
• Correct the saved settings (file switch timing,
number of saved files).
• Correct the saved settings (file switch timing,
number of saved files).
• Review the E-mail setting.
• Check the connection status with the mail
server.
• Check the destination mail server status.
• When turning the power ON immediately after it
is turned OFF, wait a few minutes before turning
it ON.
• Check the connection status with the mail
server.
• Check the destination mail server status.
• Check the connection status with the mail
server.
• Check the destination mail server status.
• Check the connection status with the mail
server.
• Check the destination mail server status.
• Check the connection status with the mail
server.
• Check the destination mail server status.
• Clear "Network setting" default operation.
4 TROUBLESHOOTING
4.4 Error Code List
4
271