INTRODUCTION
Thank you for purchasing the Mitsubishi Electric MELSEC iQ-R series programmable controllers.
This manual describes the functions, Configuration Tool, and troubleshooting to use the modules listed below.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the MELSEC iQ-R series programmable controller to handle the product correctly.
When applying the program examples provided in this manual to an actual system, ensure the applicability and confirm that it
will not cause system control problems.
Note that the menu names and operating procedures may differ depending on an operating system in use and its version.
When reading this manual, replace the names and procedures with the applicable ones as necessary.
Please make sure that the end users read this manual.
The program examples shown in this manual are the examples in which a high speed data logger module
(RD81DL96) is assigned to the input/output No. X/Y0 to X/Y1F unless otherwise specified. To use the
program examples shown in this manual, the input/output number assignment is required. For details on the
assignment of input/output number, refer to the following:
MELSEC iQ-R Module Configuration Manual
Relevant product
RD81DL96
16