Mitsubishi Electric MELSEC iQ-R Series User Manual page 288

Error code Error name
3048H to 304BH Module error
304DH to 3050H Setting file error
3051H to 3053H Module error
3054H to 3056H Setting file error
3057H Data type setting error
3058H Output format setting error
3059H to 305AH Data type setting error
305BH Output format setting error
305CH Data type setting error
305DH Output format setting error
305EH Data type setting error
305FH to 3068H Binary output format setting
error
3069H to 306AH Setting file error
306BH File format setting error
306CH Setting file error
306DH to 306EH Binary output format setting
error
306FH File format setting error
3070H Data type setting error
3071H Binary output format setting
error
4 TROUBLESHOOTING
286
4.4 Error Code List
Error description
A module error has been detected.
There is no setting file.
Or the setting file is corrupted.
A module error has been detected.
There is no setting file.
Or the setting file is corrupted.
An invalid setting has been made in the data type
setting.
Or the setting file is corrupted.
An invalid CSV output format has been set.
Or the setting file is corrupted.
An invalid setting has been made in the data type
setting.
Or the setting file is corrupted.
An invalid setting has been made in the CSV
output setting or the Unicode text output setting.
Or the setting file is corrupted.
An invalid setting has been made in the data type
setting.
Or the setting file is corrupted.
An invalid setting has been made in the CSV
output setting or the Unicode text output setting.
Or the setting file is corrupted.
An invalid setting has been made in the data type
setting.
Or the setting file is corrupted.
An invalid setting has been made in the binary
output setting.
Or the setting file is corrupted.
There is no setting file.
Or the setting file is corrupted.
An invalid setting has been made in the file
format.
Or the setting file is corrupted.
There is no setting file.
Or the setting file is corrupted.
An invalid setting has been made in the binary
output setting.
Or the setting file is corrupted.
An invalid setting has been made in the file format
setting.
Or the setting file is corrupted.
An invalid setting has been made in the data type
setting.
Or the setting file is corrupted.
An invalid setting has been made in the binary
output setting.
Or the setting file is corrupted.
Corrective action
• Take measures to reduce noise.
• Reset the CPU module and switch it to RUN. If
the same error is displayed again, a hardware
failure may occur in high speed data logger
module. Please consult your local Mitsubishi
representative.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Take measures to reduce noise.
• Reset the CPU module and switch it to RUN. If
the same error is displayed again, a hardware
failure may occur in high speed data logger
module. Please consult your local Mitsubishi
representative.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.