Mitsubishi Electric MELSEC iQ-R Series User Manual page 14

• When using Microsoft
version), Microsoft Excel 2019 (32-bit version/64-bit version), or Microsoft 365 (32-bit version/64-bit version), install Visual

Basic for Applications (abbreviated as VBA below). If VBA is not installed, the error message below will be displayed
when the "Layout setting" screen is started, and the layout settings cannot be configured.
"This workbook has lost its VBA Project, ActiveX Controls and any other programmability-related features."
• The saving format of a report file output by the report function is the xls format. Some of the functions added to Microsoft
Excel 2007 and later cannot be used.
• Microsoft Excel 2010 (64-bit version) is not supported.
• Microsoft Excel 2013 (64-bit version) is not supported.
• Microsoft Excel 2016 (64-bit version) is not supported.
Considerations for other functions
■Access target CPU setting
• When rewriting the settings in Configuration Tool, turning the power OFF and ON, or resetting a CPU module, a high speed
data logger module is prepared to communicate with an access target CPU module. Therefore, if a large number of access
target CPU modules are set, several minutes are required for this preparation.
• The following conditions may affect the general sampling, file transfer function, and e-mail function: a CPU module that
does not exist is set as an access target CPU module, or a high speed data logger module cannot communicate with the
access target CPU module temporarily because of the power interruption of access target CPU module or network failure.
Before using a high speed data logger module, make sure that the module can communicate with a CPU module set as an
access target.
■Time synchronization function
• If implementing the time synchronization with the CPU module, it will change the time of the high speed data logger
module. When the CPU module's time is changed, the high speed data logger module's time may be greatly changed.
• Since there is inaccuracy in the clock element of the CPU module and the high speed data logger module, the time may be
moved slightly forward or backward when the time is synchronized. Since changing the time of the high speed data logger
module affects the time stamp, as well as the following determination of the cycles and of the time: data logging, event
logging, and reports, configure the module to synchronize its time at the required minimum range.
Considerations for accessing a high speed data logger module
■Web browser operations and settings
• In the local area network (LAN) setting of the web browser, do not set a proxy server for the local address.
(MELSEC iQ-R High Speed Data Logger Module User's Manual (Startup))
■FTP server function
• Because of FTP client side application restrictions, if the user name or password is input incorrectly, end the FTP operation
and redo the FTP connection from the beginning. FTP may not operate correctly by reentering the correct user name or
password with the 'user' FTP command.
• The maximum number of simultaneous connections to the FTP server is 10. However, depending on the FTP client, it may
make multiple simultaneous connections, so an FTP client may not be able to login even if 10 clients are not connected. In
this situation, shutdown all the FTP clients, then restart and connect them.
• When transferring many files at once with FTP, a 426 error (data connection error) may occur. In this situation, split the files
into multiple parts then transfer them separately.
• When a web browser is used for FTP access, the user authentication screen may not be displayed due to the specification
of the web browser. In this case, enter the address of a high speed data logger module in the following format.
ftp://<user name>:<password>@<the address of a high speed data logger module or host name>/
12

Excel 2010 (32-bit version), Microsoft Excel 2013 (32-bit version), Microsoft Excel 2016 (32-bit