Mitsubishi Electric MELSEC iQ-R Series User Manual page 155

Batch data insertion
Set the data of consecutive devices in a batch.
Window
Click the [Batch insert] button on the [Data] tab of data logging setting screen.
Displayed items
Item

Data name
Change
Add subscripts
Access target CPU
Device Head
Last
Data type
Size
Scaling
Output format
Continuous setting Total number
Interval
Set the interval
automatically
Description
Displays the data name, or used to change the data name.
Select this to change the data name.
When it is not selected, the data name is automatically set to the start device.
Select this to add a consecutive numbers to the data names set by the user.
Select the access target CPU.
To add an access target CPU, select "(Add CPU)" and click the [Edit] button.
Page 133 Access target CPU setting
Set the start device.
Displays the end device calculated from the data type and size.
Select the data type.
If the data type is "String" or "Raw", the size must be specified.
Set the scale conversion equation for data.
The "Scaling" screen is displayed by clicking the [Edit] button.
Page 152 Scaling
Specify the format (such as decimal format and exponential format) when the data is output to a file.
The "Output format" screen is displayed by clicking the [Edit] button.
Page 152 Output format
Specify the total amount of data to batch insert.
Specify the device interval for the data to batch insert.
Select this to set the interval automatically in order to avoid gaps between the devices to be batch
inserted.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
153
2.5 Data Logging Setting
2