Mitsubishi Electric MELSEC iQ-R Series User Manual page 260

Symptom
The type on the update data screen is
changed to "Relation release".
Unable to import a project file.
The character strings (Project path)
the exported CSV file are not displayed
correctly.
A timeout occurs when the settings are
updated, or the update of the settings
takes long time.
An error message is displayed when
logging file clear is executed.
*1 Specify from the "Global label/common device comment import setting" screen.
4 TROUBLESHOOTING
258
4.3 Troubleshooting by Symptom
Check point
Does the global label to be updated exist?
Is the global label to be updated configurable in
Configuration Tool?
Is inconsistency occurred when using the related data
in conditional expression?
Is specified project file incorrect?
Is inconsistency occurred by import?
Is the upper limit of the number of settings exceeded?
*1 *1
in Has the project path of the character string described
other than English been set by Configuration Tool?
Is there any abnormality in the connection route
between the high speed data logger module and
access target CPU?
Is there any error in the access target CPU setting?
Is there any unnecessary access target CPU setting?
Is the number of files in the inserted SD memory card
large?
Corrective action
• Open the project in GX Works3 and check that the
global label to be updated exist.
• Open the project in GX Works3 and check that the
start device, the data type, and the number of strings
of the global label to be updated are configurable
value in Configuration Tool.
• Open the project in GX Works3 and check that the
related data used in conditional expression has been
changed to the data type which is not configurable.
• Specify the correct project file.
• Review the settings of import source.
• Review the settings of import destination.
• Correct the settings to be imported. (MELSEC iQ-
R High Speed Data Logger Module User's Manual
(Startup))
• Correct the number of settings. (MELSEC iQ-R
High Speed Data Logger Module User's Manual
(Startup))
*1
• Specify the project path of the character string
described in the English and then import the project.
• Check the communication route between the high
speed data logger module and the access target CPU.
• Correct "Access target CPU setting".
• Delete the unnecessary access target CPU setting.
(Depending on the number of items set in access
target CPU settings, it may take several minutes until
'Module READY' (X0) turns ON.)
• Execute the module operation restart after a while.
• When the module restart operation is failed, execute it
again after a while.