Mitsubishi Electric MELSEC iQ-R Series User Manual page 356

Windows standard FTP commands
Command
binary
bye
close
delete
dir
get
ls
mdir
mls
mput
open
put
pwd
quit
*1
quote
rename
user
append
ascii
cd
disconect
*1
literal
recv
remotehelp
rmdir
send
type
*1 These commands are supported, however, subcommands for high speed data logger modules are not provided.
APPX
354
Appendix 8 Supported FTP Command
Description
Notifies to transfer data without converting a file.
Disconnects and terminates a connection with an FTP server.
Disconnects a connection with an FTP server.
Deletes a file in a high speed data logger module.
Displays the file information of a high speed data logger module.
Reads a file from a high speed data logger module.
Displays the file name of a high speed data logger module.
Stores the file information of a high speed data logger module.
Reads the list of directories and files from a high speed data logger module.
Writes files to a high speed data logger module.
Connects an FTP server with a personal computer.
Writes files to a high speed data logger module.
Displays the current directory of a high speed data logger module.
Disconnects and terminates a connection with an FTP server.
Sends a sub command on an FTP server.
Changes the file name of a high speed data logger module.
Enters the user name and password of a high speed data logger module.
Adds a file to an FTP server.
Sets the mode of file transfer to ASCII.
Changes the working directory.
Returns to a command line by disconnecting a connection with an FTP server.
Sends a sub command on an FTP server.
Acquires a file on an FTP server.
Displays the Help of an FTP command that can be executed on an FTP server.
Deletes the directory of an FTP server.
Transfers a file to an FTP server.
Displays the current file transfer mode. (No FTP command transfer)
By specifying a type name, the transfer mode is changed. (With FTP command transfer)