Mitsubishi Electric MELSEC iQ-R Series User Manual page 203

● Saved file: Outputs the data that have completed to be stored.
The latest saved file (one file) is output in a report from among the data logging files (saved files), which have completed to be
stored with every file switching. Reports can be created from the logging data divided according to the data condition or time,
or from the logging data before and after the trigger conditions rise of trigger logging.
Reports can be output according to the number of records which may differ in each saved file.
Ex.
Create a per-batch or per-lot report when the data logging file is switched at the timing of the end of a batch or lot.
Report layout
● Accumulating file: Accumulating data is output.
A report can be output from the accumulating data logging file. When creating a report file such as daily report or per process
report, the processing can be tracked by creating a report file from the data being created.
Ex.
Output the latest logging data which is being stored when the data logging file is switched at the timing of the end of a batch or
lot.
Report layout
● Both: Both the data are output.
A report is created from the data of both the latest saved file and the accumulating file. The latest logging data up to the timing
when the creation trigger is satisfied can be output to a report by specifying the number of records.
At this time, set the number of the file switching records of the data logging file so it is always greater than the number of
records to be output to a report.
Report layout
Accumulating file
File output
Accumulating file
File output
Accumulating file
File output
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
(New) 'Saved files'
FileName_02 FileName_01
Latest saved file
(New) 'Saved files'
FileName_02 FileName_01
Latest saved file
(New) 'Saved files'
FileName_02 FileName_01
Latest saved file
201
2.7 Report Setting
2