Mitsubishi Electric MELSEC iQ-R Series User Manual page 185

Event batch insertion
Window
Click the [Batch insert] button on the [Event ] tab on the event logging setting screen.
Displayed items
Item
Event name Event name
Append subscripts to
event names
Continuous setting Total number
Interval
Set the interval
automatically
Comment Comment at event
occurrence
Comment at event
restoration
Data value output Output data values
Condition
*1 [Import] button and [Relation release] button do not exist.
Description
Set the event name. (Up to 32 characters)
Select this to add a serial number to the event name set by the user.
Format of the subscript is "Event name (n)."
Specify the total amount of events to batch insert.
Specify the device interval of the monitoring data to batch insert.
Select this to set the interval automatically in order to avoid gaps between the devices of monitoring
data to be inserted in batch.
Specify the string to be output at an event occurrence. (Up to 32 characters)
Specify the string to be output at the event restoration. (Up to 32 characters)
Select this to output data values at an event occurrence.
Specify the event occurrence condition.
The settings are same as mentioned in the following section.
Page 181 Event setting (single condition)
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
*1
2.6 Event Logging Setting
2
183