Settings Menu; Sound; Language; Calibrate Touch Screen - Husqvarna VIKING Amber Air S 600 User Manual

Settings Menu

Touch the Settings button (A) to open the settings menu.
Here you can adjust the machine settings. Touch the Settings
button again to close the settings menu and save the changes
in the machine memory.
The changes in settings are saved after turning off the
machine.

Sound

Turn the sound on and off by touching the speaker icon. A
crossed-out speaker indicates that the sound is off.

Language

Step through the available languages used on screen by
touching the arrows. The language description changes for
each touch.

Calibrate Touch Screen

When touching the icons on the screen, the screen might
need a calibration to adjust to your touch. Touch the calibrate
icon to open a special screen for touch screen calibration.
With your stylus, first touch the center of the cross in the top
left corner of the screen. The cross changes color and a new
cross appears. Continue touching the center of the crosses
that appear. The calibration screen closes automatically when
you have touched all calibration crosses.
Note: If you cannot enter calibration mode through the settings menu,
press and hold the Info button while starting the machine. Calibration
mode opens and calibration can be performed.

Pop-Ups

When needed, your machine can alert you, by showing pop-up windows on the screen. The pop-up messages and explanations
are found below.
Front Cover Open
As a safety precaution you cannot sew with the front
cover open. The pop-up will close when the front cover
is closed.
Warning, Overloaded, Please Wait
If you are sewing on very heavy fabric or if the machine
is blocked when sewing, the main motor can get
overloaded and the machine will stop sewing. The pop-
up will close when the main motor and power supply are
secure.
22
A
B. Sound
C. Language
D. Calibrate Touch Screen
Presser Foot is Up
You cannot start sewing with the presser foot up. The pop-up
will close when the presser foot is lowered.
Please Raise the Presser Foot to Calibrate
The presser foot must be raised when turning on the machine.
The pop-up will close when the presser foot is raised.
3 Touch Screen
B
C
D