Edit Your Stitch Or Lettering Program - Husqvarna Royale User Manual

EDIT YOUR STITCH OR
LETTERING PROGRAM
Insert a stitch or letter
placed at the cursor.
Adjust text and stitches
mirror, adjust length and width or change the
density of the selected stitch, in the same way as when in
Delete a stitch or letter
delete the entire program.
Duplicate a stitch or letter
Note: Make your adjustments on the stitch before duplicating and
the copied stitch includes the adjustments.
message where you can enter the exact number of copies
you want to insert.
Replace a stitch or letter
Insert the new stitch. It will be placed at the cursor.
Zoom to All
If the stitch or stitch program is wider than what can be
see the entire width of the stitch program.
Note: Zoom to All is only visible if the stitch or stitch program is
Preview
View your stitch program horizontally by touching the
size. If the program is too long to be shown in total, use
ADJUST THE ENTIRE PROGRAM
the whole program.
5:4 5:4
5 Programming
Duplicate
Delete
Preview