Front Panel Of An Acx1100 Router; Figure 12: Front Panel Of The Ac-Powered Acx1100 Router - Juniper ACX1000 Hardware Manual

Front Panel of an ACX1100 Router

Copyright © 2017, Juniper Networks, Inc.
ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping on page 5
LEDs on ACX1000 and ACX1100 Routers on page 35
The front panel of an ACX1100 router consists of the following components (see
Figure 12 on page 31 and Figure 13 on page
Chassis status LED labeled
AC power inlets or DC power terminals
USB port for upgrading Junos OS
Management Ethernet port labeled
Console or auxiliary port labeled
Alarm contact port labeled
External clocking input port labeled
External clocking ports supporting
Network ports and corresponding status LEDs:
Eight Gigabit Ethernet (
Combination ports labeled
Four Gigabit Ethernet RJ-45 ports
Four Gigabit Ethernet SFP ports that accept SFP transceivers

Figure 12: Front Panel of the AC-Powered ACX1100 Router

1 2 3
CONSOLE/AUX
11 10 9
1— AC inlets
2— Management Ethernet port
3— Alarm contact port
4— Gigabit Ethernet ( GE ) ports
5— Combination Gigabit Ethernet RJ-45 ports
6—ESD point
Chapter 2: Chassis Components and Descriptions
32):
SYS
MGMT
CONSOLE/AUX
—accepts a DE-15 alarm cable
ALARM
EXT REF CLK IN
and
1PPS 10MHz
GE ) RJ-45 ports labeled 0/0/0
through , either:
0/1/0 0/1/3
4
GE
0/0/4 0/0/5 0/0/6 0/0/7
0/0/0 0/0/1 0/0/2 0/0/3
8
7— Combination Gigabit Ethernet SFP ports
8— External clocking ports
9— Console or auxiliary port
10— USB port
11— System (
input and output
through 0/0/7
5 6
0/1/2 0/1/3
0/1/0 0/1/1
COMBO PORTS 0/1/0 0/1/1 0/1/2 0/1/3
7
SYS ) LED
31