Toshiba TOSVERT VF-P7 Instruction Manual page 232

2) Standard specifications by types
Item
Voltage class
Applicable motor [kW]
Model No.
Type
Output capacity [kVA] (*1)
Output current [A]
Output voltage 3-phase 200 to 230 V (Maximum output voltage corresponds to input supply voltage.)
Rated overload current
Dynamic braking
circuit
Dynamic braking
resistor
Main circuit
Voltage,
Control
frequency
circuit
Allowable fluctuation
Protection structure
Cooling system
Coating color
EMI filter
Item
Voltage class
Applicable motor [kW]
Type
Form 4110KP
Output capacity [kVA] (*1)
Output current [A]
Output voltage 3-phase 380-460 V (Maximum output voltage corresponds to input supply voltage.)
Rated overload current
Dynamic braking
circuit
Dynamic braking
resistor
Main circuit
Voltage,
Control
frequency
circuit
Allowable fluctuation
Protection structure
Cooling method
Coating color
EMI filter
(*1): Rated output capacity indicates a value based on the condition that output voltage is 220 V in case of the 200 V class or
440 V in case of the 400 V class.
(*2): The models of 30 kW or higher have neither cover for the wiring hole that has a big aperture nor space for bending
external cables inside the unit. When a protector is installed externally, use an optional cover for the wiring hole.
(*3): Allowable voltage variation is +/-10 % in continuously operation (100 % load)
(*4): Be sure to attach DC reactor for the models: 200V class 75kW or more and 400V class 110kW or more.
(Not necessary for DC input.)
(*5): This regulation is overload value from the stop state at ambient temperature state within regulation value.
3) Comparison in specifications (different points only)
Item
1. Rated overload
current
2. PWM carrier
frequency
3.Acceleration/deceleration
time (default setting)
75
2750P
110
288
120% for 1 minute, 150% for 0.3 second (*5)
Built-in type dynamic braking drive circuit is optionally available
External braking resistor is available optionally
3-phase 200-230 V, 50/60 Hz
Single phase 200-230 V, 50/60 Hz
Voltage: +10%/-15% (*3), Frequency: +/-5%
Open type (JEM1030) IP00 (*2)
Option to be installed externally
110 132 160
4132KP 4160KP
160 194 236
210 255 310
120% for 1 minute, 150% for 0.3 second (*5)
Built-in type dynamic braking drive circuit is optionally available
External braking resistor is available optionally
3-phase 380-460 V, 50/60 Hz
Single phase 380-460 V, 50/60 Hz
Voltage: +10%/-15% (*3), Frequency: +/-5%
Open type (JEM1030) IP00 (*2)
Option to be installed externally
VFP7-2185P∼2550P
VFP7-4185P∼4750P
120 % for 1 minutes
180 % for 0.5 second
Default setting: 12 kHz
200 V class 37,45 kW type: 8 kHz
200 V class 55 kW type: 2.2 kHz
400 V class 37-55 kW type: 8 kHz
400 V class 75 kW type: 2.2 kHz
Adjustable between 0.5 and 15 kHz
2550P,4750P:
Adjustable between 0.5 and 8 kHz
30 seconds
4750P: 60 seconds
K-2
Description
200 V class
90
VFP7–
2900P
133
350
Forced-air cooling
Munsell 5Y-8/0.5
Description
400 V class
200 220
VFP7–
4200KP 4220KP
300 320
377 420
Forced-air cooling
Munsell 5Y-8/0.5
VFP7-2750P∼2110KP
VFP7-4900P∼4315KP
120 % for 1 minutes
150 % for 0.3 second
Default setting: 2.2 kHz
Adjustable between 0.5 and 5 kHz
110
2110KP
160
420
280 315
4280KP 4315KP
412 470
540 590
60 seconds