Table of Contents
Advertisement
◇◆◇ Moving the cursor ◇◆◇
Press the [ ↑ ], [ ↓ ], [ ← ] and [ → ] keys.
◇◆◇ Inputting characters ◇◆◇
Hold down the [CHAR] key and press the key with the character to be input on the lower right. Three characters
will scroll each time the character key is pressed.
◇◆◇ Correcting an input ◇◆◇
After returning one character by pressing the [DEL] key, input the character again.
(6) Installing the shoulder cover
Return the shoulder coverB, removed in section
This completes the setting of the origin with the origin data input method.
WARNING
◇◆◇ If the origin input data is incorrect ◇◆◇
If the origin input data is incorrect, the alarm No. 1760 (origin setting data illegal) will occur when origin data input.
In this case, reconfirm the value input for the origin data.
B
"(1) Confirming the origin data" on page 13
Always remove and install the cover with the controller power turned OFF. Failure
to do so could lead to the robot moving because of incorrect operations, or to
physical damage or personal injury.
Get other manuals https://www.bkmanuals.com
2Unpacking to Installation
to its original position.
Setting the origin 2-17
Advertisement
Table of Contents
