Applicable System - Mitsubishi MELSEC QD75P User Manual

2 SYSTEM CONFIGURATION

2.3 Applicable system

The QD75 can be used in the following system.
(1) Applicable modules and the number of installable modules
(2) Usable base unit
(3) Compatibility with multiple PLC system
(4) Supported software packages
The following table indicates the CPU modules and network modules (for remote
I/O station) usable with the QD75 and the number of installable modules.
Applicable modules
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
CPU Q02HCPU
module Q06HCPU
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
QJ72LP25-25
Network QJ72BR15
module QJ72LP25G
QJ72LP25GE
1 Refer to the User's Manual (Hardware Design, Maintenanse and Inspection) of the CPU
module used.
2 Refer to the Q Corresponding MELSECNET/H Network System Reference Manual
(Remote I/O Network).
The QD75 can be installed in any of the I/O slots ( 3 ) of a base unit.
When installing the QD75, always consider the power supply capacity since a
shortage of the power supply capacity may occur depending on the combination
with the other installed module and the number of installed module.
3 Within the I/O point range of the CPU module and network module (for remote
I/O station).
When using the QD75 in a multiple PLC system, first refer to the QCPU (Q mode)
User's Manual (Function Explanation, Program Fundamentals).
The following table lists the compatibility between the systems using the QD75 and
the software packages. GX Developer is required for use of the QD75.
Q00J/Q00/Q01CPU
Multiple PLC
Q02/Q02H/Q06H/
Multiple PLC
Q12H/Q25HCPU
Q12PH/Q25PHCPU
Multiple PLC
For use on MELSECNET/H remote
I/O station
Get other manuals https://www.bkmanuals.com
Number of installable modules
Max. 16 modules
Max. 24 modules
Max. 64 modules
Max. 64 modules
Max. 64 modules
GX Developer
Single PLC
Version 7 or more
system
Version 8 or more
system
Single PLC
Version 4 or more
system
Version 6 or more
system
Single PLC
system
Version 7.10L or more
system
Version 6 or more
2 - 5
MELSEC-Q
Remarks
( 1)
Installable in the Q mode
only
( 1)
( 1)
MELSECNET/H remote I/O
station ( 2)
Software version
GX Configurator-QP
Version 2.10L or more
Version 2.13P or more
Version 2.10L or more