Unpacking And Installation; Unpacking; Installation Of The Scanner; Installation Of The Drum Unit - Canon iR C2880 Series Service Manual

2.2 Unpacking and Installation

2.2.1 Unpacking

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
MEMO:
When installing the Plain pedestal/Cassette pedestal, be sure to place the
main body on the Plain pedestal/Cassette pedestal. (For installation of the
Plain pedestal/Cassette pedestal, see the Installation Procedure.)
1) Unpack the host machine.
2) Hold the 4 grips [1] (left, right), and lift the host machine off the skid [2].
The machine weighs a maximum of about 125 kg (including a DADF). Be
sure to work in a group of 4 persons when lifting it.
Also, lift the main body while keeping it level.
[1]
3) Remove all the tapes from the host machine.

2.2.2 Installation of the Scanner

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1) Open the copyboard or the DADF to remove the copyboard glass protec-
tion pad.
2) Remove the scanning system fixing screw [1] found at the external side of
the reader right cover (Take care to keep the scanning system fixing screw
in preparation for shifting the machine).
[2]
[1]
F-2-6
0013-8244

2.2.3 Installation of the Drum Unit

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1) Open the front cover [1].
2) Press the claw down [1], and detach the handle cover [2].
3) Press the release lever [1] to open the lower right cover [2] of the host ma-
0013-8246
chine.
4) Remove tapes and the protection sheet [3] attached to the duplexing unit.
For taking in/out of the process unit, make sure to do with the duplexing
unit [4] open.
Chapter 2
[1]
F-2-7
[1]
F-2-8
[1]
[2]
F-2-9
0013-8248
2-5