Chapter 2
[3]
[3]
[2]
F-2-203
13) Attach the protective cover [1].
- Hook the 2 claws [2].
- 1 screw [3] (removed in step 6)
[1]
F-2-204
2. Attaching the finisher connector mount
1) Slide out the upper and lower cassettes.
2) Detach the left lower cover [1].
- 5 screws [2]
[1]
F-2-205
3) Free the harness [1] from the 3 wire saddles [2].
2-48
[4]
[2]
[1]
[3]
[2]
[2]
[2]
[1]
[2]
F-2-206
4) Attach the finisher connector mount [1].
- 1 screw (RS tightening; M3X8) [2]
[1]
F-2-207
5) Secure the harness [1] for the finisher with the 2 wire saddles [2] and the
edge saddle [3]; and then, connect the 2 connectors [4].
[3]
[1]
F-2-208
6) Cut the face plate [1] of the left lower cover with nippers.
[1]
F-2-209
7) Attach the covers in the reverse order of detaching.
- left lower cover
- rear lower cover
- rear upper cover
8) Return the upper and lower cassettes.
9) Secure the cable with the wire saddle.
10) Connect the power cable to the outlet.
11) Turn on the main power switch.
[2]
[2]
[4]