When formatting the HDD for all partition, there will be partitions on the HDD and all these partitions will be formatted (initialized) and the main controller will
be made ready for use.
All the information needed to set up the partition is found in the partition settings file (on the SST, 'HDFormat' in the folder 'iRCXXXX').
[1] HDD (service part; without partitions)
[2] Formatting for full partition (only in safe mode)
[3] HDD after formatting
[4] Partition settings information file
18.3.2 Formatting Selected Partitions
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR C3080i
When formatting the HDD for selected partitions, only those selected partitions will be initialized.