Advertisement
Refer to the following for Guides / CDs.
Starter Guide
User Software CD
Manual CD
PCL User Software
Yes: Included
2.2 Unpacking and Installation
2.2.1 Unpacking
MEMO:
When installing the Cassette Feeding Unit, put the host machine on the
Cassette Feeding Unit. (Refer to the instruction sheet included with the
cassette pedestal when installing the cassette pedestal.)
1) Unpack the host machine.
2) Hold the 4 grips [1], and lift down the host machine from the palette [2].
Since this machine weighs 44kg at the maximum, make sure to lift it with 2
people or more. In addition, lift it in a horizontal position.
[1]
3) Remove all tapes and fixing members on the host machine.
4) Remove the A5 paper [2] on the feeder [1].
T-2-1
iR C1021i
Yes
Yes
Yes
Yes
[1]
[2]
F-2-3
0019-0633
2.2.2 Installation
1) Open the front cover [1].
2) Place 2 sheets of A4 paper [1] on ETB side-by-side.
Points to note when installing/removing the toner cartridge
- To protect ETB, make sure to place the paper on ETB when handing it.
- Be careful not to damage or scratch the ETB unit. (It causes a pickup
failure or lowers the print quality.
3) Hold the grip [A] and remove the Bk toner cartridge [1].
[1]
[2]
F-2-4
F-2-5
F-2-6
Chapter 2
0019-0635
[1]
[1]
2-3
Advertisement
Chapters
Troubleshooting
